Nickel Brush Plating Solution 500ml
Regular price
18.00
Sale
Nickel Brush Plating Solution 500ml
This Nickel Brush Plating Solution quickly plates a beautiful white layer. Great for plating a barrier layer when plating on copper and copper containing alloys.
Operating Conditions and Deposit Data
| Voltage Range | 3.0 – 4 volts |
| Temperature | 18 – 40 °C |
| Nickel Concentration | 74 g/l |
| Electrode | Carbon, Nickel or Platinum (see notes) |
| Nickel content in plate | 99.9% (balance carbon) |
| Plating Rate at (3.5 volts, Platinum electrode) | Approx. 0.3 micron per minute (spot) |
| Hardness | 630 – 640 MPa (Vickers) |
| Density of deposit | 8.9 g/cm3 |
| Stress | High stress |
| Special storage requirements | None |
| Shelf life | Over 5 years |
| Health and Safety classification | Harmful |
| Special considerations | None |
| Transport (UN number) | None: Not classified as dangerous for transport |
Notes:
- We strongly advise against the use of stainless steel anodes for most of our plating processes
- Plating rates are calculated over a sample area which is permanently covered by swab.