Copper Brush Plating Solution 250ml
Regular price
8.99
Sale
Copper Brush Plating Solution 250ml
Please note you need brush plating equipment to use this solution
Our Copper Plating Solution plates fast to create a beautifully lustrous finish of fresh copper.
Operating Conditions and Deposit Data
| Voltage Range | 4 volts |
| Temperature | Above 15 °C |
| Copper Concentration | 36 g/l |
| Electrode | Copper, Carbon or Platinum(see notes) |
| Copper content in plate | 99.8% |
| Plating Rate at (3.5 volts, Platinum electrode) | 2 microns per minute (spot) |
| Hardness | 370 Hv |
| Density of deposit | 8.9 g/cm3 |
| Stress | Low – medium stress |
| Special storage requirements | None |
| Shelf life | 1 – 2 years |
| Health and Safety classification | Irritant |
| Special considerations | None |
| Transport (UN number) | None: Not classified as dangerous for transport |
Notes:
- We strongly advise against the use of stainless steel anodes for most of our plating processes
- Plating rates are calculated over a sample area which is permanently covered by swab.