Nickel Brush Plating Solution 500ml

Nickel Brush Plating Solution 500ml

Regular price 18.00 Sale

Nickel Brush Plating Solution 500ml

This Nickel Brush Plating Solution quickly plates a beautiful white layer. Great for plating a barrier layer when plating on copper and copper containing alloys.
 
 

Operating Conditions and Deposit Data

Voltage Range 3.0 – 4 volts
Temperature 18 – 40 °C
Nickel Concentration 74 g/l
Electrode Carbon, Nickel or Platinum (see notes)
Nickel content in plate 99.9% (balance carbon)
Plating Rate at (3.5 volts, Platinum electrode) Approx. 0.3 micron per minute (spot)
Hardness 630 – 640 MPa (Vickers)
Density of deposit 8.9 g/cm3
Stress High stress
Special storage requirements None
Shelf life Over 5 years
Health and Safety classification Harmful
Special considerations None
Transport (UN number) None: Not classified as dangerous for transport

 

Notes:

  • We strongly advise against the use of stainless steel anodes for most of our plating processes
  • Plating rates are calculated over a sample area which is permanently covered by swab.