Nickel Brush Plating Solution 250ml
This Nickel Brush Plating Solution quickly plates a beautiful white layer. Great for plating a barrier layer when plating on copper and copper containing alloys.
Operating Conditions and Deposit Data
| Voltage Range |
3.0 – 4 volts |
| Temperature |
18 – 40 °C |
| Nickel Concentration |
74 g/l |
| Electrode |
Carbon, Nickel or Platinum (see notes) |
| Nickel content in plate |
99.9% (balance carbon) |
| Plating Rate at (3.5 volts, Platinum electrode) |
Approx. 0.3 micron per minute (spot) |
| Hardness |
630 – 640 MPa (Vickers) |
| Density of deposit |
8.9 g/cm3 |
| Stress |
High stress |
| Special storage requirements |
None |
| Shelf life |
Over 5 years |
| Health and Safety classification |
Harmful |
| Special considerations |
None |
| Transport (UN number) |
None: Not classified as dangerous for transport |
Notes:
- We strongly advise against the use of stainless steel anodes for most of our plating processes
- Plating rates are calculated over a sample area which is permanently covered by swab.
