Copper Brush Plating Solution 250ml
Please note you need brush plating equipment to use this solution
Our Copper Plating Solution plates fast to create a beautifully lustrous finish of fresh copper.
Operating Conditions and Deposit Data
| Voltage Range |
4 volts |
| Temperature |
Above 15 °C |
| Copper Concentration |
36 g/l |
| Electrode |
Copper, Carbon or Platinum(see notes) |
| Copper content in plate |
99.8% |
| Plating Rate at (3.5 volts, Platinum electrode) |
2 microns per minute (spot) |
| Hardness |
370 Hv |
| Density of deposit |
8.9 g/cm3 |
| Stress |
Low – medium stress |
| Special storage requirements |
None |
| Shelf life |
1 – 2 years |
| Health and Safety classification |
Irritant |
| Special considerations |
None |
| Transport (UN number) |
None: Not classified as dangerous for transport |
Notes:
- We strongly advise against the use of stainless steel anodes for most of our plating processes
- Plating rates are calculated over a sample area which is permanently covered by swab.
